| BATTERY CHAGER SPECIFICATION | 
                    | Model | SKC-6A | SKC-10A | SKC-15A | SKC-30A | 
                    | Nominal Battery Voltage | 12V DC | 12V DC | 12V DC | 12V DC | 
                    | Maximum Output-Current(Amps ave) |  | 10A DC | 15A DC | 30A DC | 
                    | Total Battery Capacity (recommanded range) | 30Ah~150Ah | 100Ah~200Ah | 200Ah~300Ah | 100Ah~500Ah | 
                    | Maximum total load on batteries during charging | 6A DC | 10A DC | 15A DC | 30A DC | 
                    | Maximum Voltage Electronic Regulation | 14.50V @ 25℃ | 
                    | Mains Supply Voltage | 220~240Vac 50~60Hz | 
                    | Maximum Consumption | 72VA | 120VA | 180VA | 360VA | 
                    | Tolerance to Mains supply distortion | 16%THD | 
                    | Mains protection | Reverse polarity, short circuit | 
                    | Output Protection | short circuit, charging full | 
                    | Temperature range | -10℃~45℃ | 
                    | Metering:Amps Analogue Moving Coil | 10A FSD | 15A FSD | 20A FSD | 50A FSD | 
                    | Cabinet:W×D×H | 200×163×125 | 200×163×125 | 200×163×125 | 200×163×125 | 
                    | Connections:input | 5A 3pin 2m cable | 10A 3pin 2m cable | 10A 3pin 2m cable | 10A 3pin 2m cable | 
                    | Connections:output | 100A Binding posts | 100A Binding posts | 100A Binding posts | 100A Binding posts | 
                    | Connections:output cable minimum size | 10mm2 Per2m | 10mm2 Per2m | 10mm2 Per2m | 10mm2 Per2m |