FREE-CLIP ---> This kit build in the 12F683 chip, and use YAOSM 5 Pins method, you can download the free chip core like OpenWii / WiiFree / YAOSM / Wiinja to make your own PLUG and PLAY upgradeable Wii chip in few minutes!

Discuss : http://wiinewz.com/forums/wiifree/67867-free-clip-this-kit-build-in-the-12f683-chip-and-use-yaosm-5-pins-method.html

Discuss : The OPEN-CLIP build in the MEGA8L chip!

The FREE-CLIP build in the 12F683 chip! And it can re-program through the FREE-Programmer , and can upgrade the core from DVD too!

And it support D2A/D2B and DMS console only, not support the D2C console, and don't support the pins-cut version too.

The FREE-CLIP circuit :
yaosm 3.0 final - official thread --- By bell
http://wiinewz.com/forums/yaosm/66977-yaosm-3-0-final-official-thread.html

Important update... new hex files will be released soon. It seems like the regionbyte in the eeprom can sometimes be reset to 0x00 (JAP). I'm not sure why it happens but I've made changes should prevent it from happening. I've seen it happen on two different Wii's. One here in the forums and one of my friends experienced the same thing. Both Wii's are DMS, not sure if that matters. It is either the disaster recovery function that causes this to happen or the automatic region detection. Actually it shouldn't happen at all, but I've seen the proofs so I know it does. It should propably not affect JAP users since they use 0x00 as regionbyte anyway.

No DVD upgrade for this. It's the PIC code, not the drivecode. Only the drivecode can be changed with DVD-upgrades.

For the most common chips there are hexfiles in this thread: http://wiinewz.com/forums/yaosm/6726...3-0-issue.html

Quickstart
1. Reprogram chip with new hex.
2. Use an non-import disc first after programming to autoconfigure the chip for your region.
3. Use the config disc to customize your settings (no GC controller required, try the resetbutton and you'll figure it out).

Changes from yaosm 2.0
- Better Dual Layer support. Supports SSBB on DVD+DL and DVD-DL with or without DVD-ROM booktype as long as your Wii can read the media.
- DVD upgradability. Proof of concept upgrade available on config disc.
- Config disc can now be used without a GC controller. Press resetbutton once to enter yaosm configuration program. Then hold to move the "cursor" and press quickly to change a setting.
- Recovery feature if an upgrade fails.